Johnson Matthey is a leading supplier of retrofit diesel emissions control systems for non-road machinery.

Burner (DPF-BU)


 
A fuel burner will be used to regenerate the filter when the machine has stopped operating. Air from a small pump is heated to >600C and blown through the filter to remove the carbon.

These systems use diesel fuel from the tank and on-board voltage. The regeneration units are mounted on the machine.

The regeneration follows a programme, which takes up to 25 minutes.

Advantage: there is no restriction on operating temperature or fuel types and is independent of electrical power lines.

Condition: requires active regeneration when particulate filter is full as indicated by the filter monitor.

Case Study: DPF-BU Burner regeneration installed on forklift truck

(PDF: 0.34Mb)

(PDF: 0.35Mb)

(PDF: 0.19Mb)

(PDF: 0.31Mb)

Diesel Particle Filter DPF BU Active

(PDF: 0.33Mb)

(PDF: 0.39Mb)

(PDF: 0.3Mb)

© Johnson Matthey 2016